There are different types of embroidery frames. Sometimes, just choosing the most appropriate canvas embroidery frame is as irritating as the stitching itself. That's why you should be told about the various opportunities offered by different embroidery frames.
The first chance is not to pick up any embroidery frame. In some cases, frames such as canvas works, such as painted canvas bags, tassels and Hapsberg lace samples are not required.
Another consideration is the price of the embroidery frame. Cheap frames are appropriate in some situations, but may not be appropriate in more complex embroidery projects. Cheap frames are ring frames, Q-Snaps and stretcher strip frames.
1] The ring frame is optimal when the frame depth is 1 inch. If the slit is narrow, the fabric slides easily. The frame can be wooden or plastic, and the wooden is better. The fabric must remain tight in the frame, but for the ring frame, several difficulties arise. For smaller fabrics, a narrower frame is sufficient to keep the fabric taut. But when the fabric is large and the embroidery work is more complicated, the ring frame can easily slide the canvas and they cannot keep tight enough. Plastic frames are easier to fall off than wood.
2] Q-Snaps is another cheap embroidery frame. The plastic strip is slotted and the fabric is clamped to the plastic frame. Another piece of plastic is also grooved on the fabric. However, compared to the scroll bar for stitching, the stretcher bar and the slate frame, the cloth is not tight enough and is easy to slide.
3] The stretcher bar is quite cheap and can be the best solution for any type of embroidery. The stretcher frame is made of wood and the fabric remains perfectly taut. These bars are sold in pairs, and each bar has dog teeth that keep the fabric tight. Pairs of stretcher bars can be combined to form a larger fabric. You can use two pairs of rectangular shapes that form the frame. This type of embroidery frame is perfect for Goldwork kits, Shadow embroidery, Whitework kits, Needle drawing kits and modern Jacobean kits.
Then there is the more expensive type of embroidery frame used in special projects. They are as follows:
1] Rolling frames. They have two pairs of rods that are screwed to each other to obtain a rectangular shape. The only downside is that sometimes the screws are loose and the fabric cannot be kept tight. But if you ignore this, the scrollbars are perfect because they can be left on the floor or table, can be placed on almost any surface, and give your hands free: you don't have to hold the frame all the time. Side bars that form holes with the main top and bottom strips are sometimes too short for your fabric, so care must be taken when choosing the frame size. Because it is too short, the side bars can affect the smoothness of the fabric and leave creases.
2] The second embroidery frame is a flat frame. The main strip is taped so you can fit the fabric on it. Slate frames also have brackets that stand on a stable surface. They are very comfortable. The side arms are slightly longer than the rolling frame to protect the fabric from creases.
3] Shoelaces. It is an improved version of the scrolling framework. The rolling frame uses only the main rod to tension the fabric. By lacing, the fabric is sewn on four sides and also stitched on the side bars to ensure better tension, allowing the canvas to stretch better. If the fabric is soft and tears easily, sew a piece of curtain on the edge and stick them to the strip.
Orignal From: Different embroidery frames
No comments:
Post a Comment