The debate about whether digitalization of embroidery is an art form or a science has been ongoing. However, while this argument may take some time to resolve, troubleshooting is one aspect that needs to be addressed now. There are plenty of fabrics, threads, hoops, needles, stabilizers and software tools, but even the most experienced digitizers occasionally slip, which is natural. In addition to these complex designs picked up by creative graphic designers, and the problem of recreating them in embroidery becomes irrelevant.
Although none of the above facts can be used as an excuse for sloppy digitization, each digitizer needs to be identified by some common errors and their solutions. That's why we put together some tips to help you with some troubleshooting routines.
How to deal with embroidery blanks?
For various reasons, it is possible to cause a gap between the contours, where the contour does not conform to the internal stitch. Since the internal pins tend to pull the liner inwardly, the liner is insufficient, the tension compensation is insufficient, and the type or weight incompatibility of the stabilizer should enter the embroidery digitizer. Sometimes you may also need to increase the layer on the stabilizer.
How to fix a narrow satin needle?
Although satin needles look great in theory or in software, they may be narrower than expected. In this case, we recommend editing to increase the column width. If this is not done during test sewing, it is recommended to increase the strength or number of layers of the stabilizer and check the top and bottom thread tension.
How to deal with coverage complications?
When your stitches are too light, we recommend increasing the density by reducing the design size or switching to a heavier thread type. However, if you encounter a reverse situation, a bullet-proof patch will eventually appear, and we recommend increasing the design size or switching to a lighter thread type.
How to solve fabric wrinkles and buckling?
Whenever you notice that the fabric is wrinkled around the outer edge of the design, make sure that the density is not too thick and that the stitch length is not too short. Sometimes it is helpful to increase the design size by 10-15%. However, if you have knitted or lightweight fabrics on hand, you need to use a stabilizer to create a solid foundation.
How to deal with the lack of stitches on the fabric?
Many times, embroidery digitizers are confused by the fact that their assigned stitches appear in the software, but are lost in sewing. This situation mainly occurs in the case of satin stitches, because some machines do not have a wide range of programming and simply omit their stitches. The best solution is to reduce the design size and make a thinner column, or change the satin equivalent to a random fill.
While the above tips are definitely helpful for quick fixes, the test run is the only thing that will keep you ahead and help you solve every problem before the file reaches the client - the logo of a truly professional embroidered digitizer.
Orignal From: Top 5 Embroidery Digital Troubleshooting Tips
No comments:
Post a Comment