Cycling - use the float compass or mental level to estimate the slope of the slope

Most cyclists know without a doubt when we climb or go downhill, especially on steep slopes. We can not only tell us through the visual, but we can also feel the different pedaling pressure in the legs. However, under certain weather, wind or physical conditions, gradual tilting may be more difficult to detect and adapt to distance riding. Here are two inexpensive ways to estimate or track the less tilt of a long bike ride.

1. from

Float/ball compass from

 [1 to 1-1 / 16" diameter].

• Purchase a floating fluid ball compass set prepared by a bicycle in an insulated metal table tennis. This model comes with a built-in handlebar bracket. If needed, it can be mounted directly to the handlebars, which can take up space for other items, such as a computer or headlights. It can also look amateur.
• Alternatively, the ball portion is pulled out of its table tennis frame and then partially filled or bonded to the hollow end of the handlebar if there is no magnetic interference there. This kind of installation does not get in the way and is small.
• Wrap the black plastic tape around the end of the handle to cover only the glued portion of the compass housing. That is, keep the floating vertices in the compass visible.

Because the entire ball in this compass floats horizontally within its transparent liquid-tight enclosure, its apex floats straight. Sometimes this apex is a small bubble above the float. Thus, the direction of the floating apex indicates any offset from the horizontal from the mark reference point at the top of the housing. If the vertex moves forward from that point or marker, the rider will go uphill. If it moves backwards, the rider is moving down.

However, these float compasses only provide a ramp-slope route reading, although larger spheres may make it easier to observe a tilt similar to a gyroscope. Their main advantage is the simultaneous display of direction and large tilt readings to the rider of the bicycle.

2. from

Core of the spiritual level from

 [Large floating bubble liquid is sealed in a small tube with an intermediate mark].

For more sensitive indicators with a lower slope, the mental level works best.

• Buy a mini or chalk line type on the Internet or a local hardware store.
• Trim the outer plastic mounting to its vicinity for easy installation.
• Use a dry sealant or glue to install it parallel to the top or side of the bicycle beam.
• If necessary, wrap the tape around the end of the crossbar and level to get extra retention.

Since the device is sensitive to small changes in position or gradient, its mounting accessories must be rigid. Otherwise, the mental level itself will change its position, which will destroy the reading. However, once installed securely, it can easily detect the slightest tilt or tilt. Of course, the level must be installed while the bicycle is standing in a horizontal position.

In addition, when riding a bicycle, the rider wants to stop or slide slowly for reading. The power to peddle a mobile bike affects the position of horizontal bubbles. In addition, this bubble can rupture when riding on a bumpy or rough surface.

Summary from

 . These devices help riders monitor all aspects of their riding, including all road or trail slopes, without the need to carry a Global Positioning System [GPS], which will accurately measure the tilt direction and tilt. Some advanced bicycle computers [cycles] will also measure the percentage of tilt. However, some of the things between all of these devices will be good in terms of ease of measurement and cost.

---

Orignal From: Cycling - use the float compass or mental level to estimate the slope of the slope